![]() User ID, Password, IP Address, and Subnet mask.Īfter the access point is reset to factory default, re-verify the Ethernet connectivity and IP address issues. The 5 seconds.This clears the access points user settings, including To do this, press and hold the reset button for more If you think you have changed the IP address used to configure the Verify you are entering the correct URL in the browser. ![]() If you have changed the factory configured default IP address of theĪccess point, you will need to set your network adapter accordingly. In the Command window, type ping and your access points default IP address and press Enter. Verify that you can ping the access point on this IP address. ![]() Login to the access points default IP address of 192.168.40.1) Not a duplicate of any others on the networkġ92.168.40.10 and using a subnet mask of 255.255.255.0 can be used to The IP address of your network adapter must be on the same network Verify that the IP address of the PC being used to configure theĪccess point is on the same network as the access points configuration Verify your Ethernet connection to the access point. AWW thats an easy one all you need in the manual for configuration
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |